logo
Trygg hot dip galvanized

The hot dip galvanizing is performed in steel tub with a zinc bath holding only 450°C not to reduce the strength more than necessary. At the outlet the chain is continuously moving to prevent the links from being glued together when the zinc layer is hardening. A special ash filter scrubs the surface to keep it smooth.

Show more
Find dealer
Downlad datasheet
Ask for delivery time

Item no. Type Dimension(d x l x b) Weight(kg/m) Proof load(kN) Breaking load(kN) Max.working load(t)
115090 HLL 9-8 mm – 57x16mm, lenght of 280m 1,4 40 82 2,08
115100 KL 10-8 mm – 30x14mm, lenght of 200m 2,3 50 100 2,56
115110 HLL 11-8 mm – 66x18mm, lenght of 200m 2,1 61 122 3,1
115131 KL 13-8 mm – 39x17mm, lenght of 150m 3,4 84,5 169 4,32
115132 HL 13-8 mm – 50x18mm, lenght of 150m 3 85 170 4,32
115130 HLL 13-8 mm – 81x22mm, lenght of 150m 2,7 85 170 4,32
115160 KL 16-8 mm – 48x22mm, lenght of 100m 5,7 129 257 6,56
115162 HL 16-8 mm – 65x29mm, lenght of 100m 5,1 128,5 257 6,56
115161 LL 16-8 mm – 100x26mm, lenght of 100m 4,3 129 257 6,56
115190 KL 19-8 mm – 57x26mm, lenght of 75m 8 181,5 363 9,24
115191 HL 19-8 mm – 75x32mm, lenght of 75m 7,1 181,5 363 9,24
115192 LL 19-8 mm – 100x28mm, lenght of75m 6,5 182 363 9,24
115200 KL 20-8 mm – 60x26mm, lenght of 55m 8,5 201 402 10,24
115220 KL 22-8 mm – 66x30mm, lenght of 55m 11 243,5 487 12,4
115221 HL 22-8 mm – 88x30mm, lenght of 55m 9,4 243,5 487 12,4
115222 LL 22-8 mm – 120x32mm, lenght of 55m 8,5 244 487 12,4

d = chain wire thickness, l = internal lenght, b = internal width
HLL / LL – long link chain
HL – mid link chain
KL – short link chain